Taking the sawdust dryer as an example, its main advantages are high drying efficiency, low energy consumption and few faults. Generally speaking, sudden equipment shutdown during production is not a quality problem of accessories. In most cases, it is caused by circuit failure. How to deal with it?

 1. If the sawdust dryer stops unexpectedly during production, you should immediately determine whether it is caused by a power outage. If so, all control buttons or switches should be turned off to prevent sudden calls from causing equipment damage or worker casualties.

 2. It is not caused by a power outage. The circuits or supporting equipment need to be checked one by one to see if the circuits of the power distribution cabinet, motor and fan are normal.

 3. If the fault cannot be confirmed or eliminated within a short period of time, the hot blast stove needs to be turned off and cooled down.

 4. Turn the control buttons of each supporting equipment of the sawdust dryer to the off state. After the equipment has completely cooled down, further remove it to avoid burns.

  The above is how to deal with the sudden shutdown of the sawdust dryer. The editor reminds you to deal with equipment failures and circuit problems calmly and with caution.