The three-cylinder sawdust dryer is a special equipment for drying irregular materials such as wood blocks, wood chips, sawdust, and sawdust. A strong dryer manufacturer can develop the most complete and economical drying plan according to customer needs. Sawdust drying The dryer can dry materials with a moisture content of about 50% to 12%.
After the sawdust dryer is switched to a three-cylinder structure, the equipment volume becomes smaller, the floor space is reduced, and the investment cost for factory construction is reduced; the three-layer rollers are nested to form a good insulation layer, with less heat energy loss, high heat utilization rate, and fast sawdust drying. The quality of the finished product is better; the inner lifting plate and guide plate are redesigned and arranged. The wet sawdust is repeatedly stirred and dispersed in the drum. During the transportation and dispersion of the high-speed hot air flow, the moisture in the wet sawdust is evaporated. Achieve the effect of 12% final moisture content.
The three-cylinder sawdust dryer uses a biomass hot blast stove or a coal-fired hot blast stove with automatic fuel supply, automatic adjustment, and efficient dust removal. The temperature of the clean heat medium is as high as 850°C. The fuel is fully burned and the cost is lower.