What is the reason for the poor production effect of the slag dryer?
When buying a slag dryer, every user pays attention to its quality, price and production effect. As long as you choose a professional, technically strong, and experienced regular machinery manufacturer, you can easily buy a cost-effective dryer to achieve the ideal drying effect. If the production effect of your slag dryer fails to meet your wishes, the following editor will tell you the reason.
1. The model configuration of the slag dryer is incorrect, and the length of the cylinder is too short, resulting in a short drying process;
2. The amount of feed is too large, and there is not enough space to promote the fusion of materials and hot air;
3. There is a problem with the design of the inside of the cylinder, so that the bulk material cannot be effectively diffused, and the heat cannot be absorbed;
4. The installation inclination of the dryer is too large, and the running speed of the material in the cylinder is too fast;
5. The temperature of the hot air flow from the furnace has not reached the required level;
6. The cylinder body of the slag dryer or the air duct is not well sealed, the hot air flow is lost or the cold air invades;
7. The water content of the slag is too much, and there is no pretreatment to reduce the water content.
The above are some factors that affect the production effect of the slag dryer. If you encounter similar problems in the production of your equipment, please compare and troubleshoot them one by one.
