Application of poultry manure dryer Poultry manure dryer machine is Dingli company according to the market demand professional design and developed one type new rotary dryer,this new type dryer suitable to drying the material moisture content at 50-65%,such as poultry manure,chicken manure, bird manure,sawdust,wood powder,wood chips,wood shaving,barley straw,oat straw, wheat straw,rye straw,rice straw, broom corn straw,The peanut vine,corn straw and other material.Depended on the different characteristic of each type of raw materials, different capacity, application requirements, cost control, automation degree, optimize the drying process technology,working conditions on site and other things,we can design the drying process.Dingli Company recommended product:this poultry manure rotary drum dryer unit capacity is larger,high efficient,saving energy,covers area is more less, it can saving energy more than 50% than ordinary dryer,it can maximize saving energy and drying costs.
Material flow is: 75-85% moisture content of the material fed into the special dehydration machine, the water removed to about 65% through the screw conveyor into the mixing drum dryer to downstream drying. Flights pick up material, carry it over, and shower it through the air stream as the drum rotates, promoting maximize efficiency of heat transfer between the material and drying air. The rapid evaporation of water vaporization, to achieve the effect of drying materials in the hot air under the rapid flow of the drum. The rotary drum dryer gives material a chance to dry before it hits the next flights, in order to prevent buildup near the wet material discharge. Drum cleaning device is installed inside of the drum to prevent the material sticking issue.
Air Stream Flow as Below:
The air through the air blower increase pressure into the hot air furnace to heating, when the temperature reached to 600-850℃, the hot air will be into dryer to drying wet material and evaporation water by induce draft fan. Through three-layer heat transfer, the air temperature reduces to 55-65℃ and then discharge from dryer. The dust and moisture are purified trough the cyclone dust collector and wet dust collector.
|Model||capacity(t/d)||evaporation capacity(t/h)||raw material moisture(%)||drying materail moisture(%)||Drying Temperature (℃)||motor power(ton)||weight(ton)||area(m²)|
|DLSG1408||31||0.70||60±5%||12-15%(can be adjusted)||350±50℃||40||17||5×14m|
General heat source
suitable for a variety of heat sources, not restricted by heat source
Low operating costs
Low energy consumption and low operating costs
use various of dust collectors to meet local environmental standards
High-precision process equipment, strict quality control
customized equipment according to customer needs
professional and technical personn-el on-site guidance operation
automatic operation, simple operati-on and saving manpower